Interscience pour la microbiologie
 

FlexiPump Scale

Peristaltic dosing pump for liquid dispensing

A perfect dose, every time

Ref. 563 000

NOUVEAU FlexiPump Scale (Réf. 563 000) - Pompe péristaltique doseuse pour distribution de liquides

FlexiPump Scale

Peristaltic dosing pump for liquid dispensing

A perfect dose, every time

Ref. 563 000

 


JUMBO PACK
BagOpen 3500 (stainless steel) - ref. 563 350
Adjustable dispensing arm - ref. 561 002
Dispensing assembly + Y (GL45 - Ø 6.4 mm) - 2x ref. 562 104
Booster kit - 2x ref. 511 000

FlexiPump Scale is a liquid dispenser combining the power of a peristaltic pump with the precision of an integrated weighing platform. It meets the strictest laboratory requirements. FlexiPump Scale is a complete solution for a wide range of applications.

  • Dispensing mode : Continuous - Dose - Multi-dose - Dose on Scale
  • Flow rate : 6 mL/min to 6 L/min (in optimal conditions, with jumbo pack)
  • Connection : Printer, computer, USB key
  • Integrated weighing platform
  • Auto calibration with customizable frequency
Demande de prix
En savoir plus

Présentation

Integrated weighing platform

The integrated weighing platform offers precise dosing and integrated weighing. Its stainless steel platform can accommodate a wide variety of containers up to a maximum load of 6.5 kg.

Distribution accuracy and reproducibility

Benefit from dosing accuracy of up to 0.5% thanks to the combination of a high-performance pump and an integrated weighing platform.

Change in volumes dispensed

To maintain optimal performance throughout your dispensing cycles, FlexiPump Scale performs automatic recalibrations at a frequency that can be configured by the user.
This regular adjustment compensates for environmental variations during use and ensures consistent dispensed volumes from the first sample to the last.

In compliance with ISO 6887 and ISO 7218 standards, FlexiPump ensures reproducible results over long dosing runs, without comparison with manual techniques.


The anti-drip system ensures drop-accurate control. It improves dispensing finish for syrupy liquids.

Autocalibration with customizable frequency

Customize autocalibration during your dispensing series, as well as the volume to be dispensed. FlexiPump Scale alerts you that a recalibration has to be carried out, even during a dispensing process.

Simplified distribution without cross-contamination

FlexiPump Scale is designed to dispense all types of media and liquids quickly and easily under sterile conditions. It eliminates sources of contamination, guaranteeing cross-contamination-free liquid transfer.


Easy calibration

Calibration is quick and easy for more accurate results. You are guided step by step.

Compact

Takes up little space on the bench or under the PSM, and is easy to move.

Easy cleaning

The dispensing set with bottle is fully autoclavable.

Ergonomically designed

FlexiPump Scale combines ease of use and productivity compared with bottle dispenser systems. Suitable for both left-handed and right-handed operators.

Saving time and improving efficiency

Equipped with a powerful motor, FlexiPump Scale efficiently dispenses all types of liquids, even syrupy ones*.

*40 x 9-mL tubes in 1 min - 29 18-mL plates in 1 min - 8 dispenses of 220 mL in 1 min - In multi-dose mode with a delay of 0.1 s in optimal conditions.

Accelerated flow

With the Jumbo Pack, including 4 pump heads, FlexiPump Scale offers precision flow rates of up to 6 L/min for processing your large test samples.

Flexibility and adaptability :
The pump that fits all your dispensing needs

Wide range of volumes

Dispense from 50 µL to 99 L* in all types of containers (plates, tubes, bottles, filter bags, sampling bags, blender bags).

(*up to 6.5 L on weighing platform for FlexiPump Scale.)

4 dispensing modes

Adapt FlexiPump Scale to your needs : continuous, dose, multi-dose or dose on scale.

3 dispensing options

Dispense using the handy gun or free your hands with the adjustable arm and/or foot pedal.

Handy gun

Adjustable arm

Foot pedal

Tubing range

From Ø 1.6 to 8 mm to adapt flow/accuracy to all your applications.

Traceability

Your dispensing parameters are tracked. FlexiPump Scale exports analysis data to a CSV file or to the printer.

New

Pure water, instantly, with Steriwater

Steriwater is an instant solution for sterile water production in laboratories. This solution simplifies the distribution of sterile water with FlexiPump for the preparation of your media (tubes, bags, bottles). Set-up is quick and easy.

Applications

FlexiPump Scale is used in food, environmental, pharmaceutical, cosmetics, animal health and public institute industries for serial dispensing (dilution tubes, bottles, jars, flasks, filter bags, sampling bags, etc.) and pouring of Petri dishes.

It is particularly well-suited to dispensing large volumes of diluent from a large test tube, or to preparing sampling wipes for PCR. It is also used to prepare samples for soil and sewage sludge analyses.

Vidéos

Vidéos

FlexiPump Scale - Peristaltic dosing pump for liquid dispensing (vost EN) - Peristaltic dosing pump for liquid dispensing

Download the video

FlexiPump - Dispensing pumps: Overview of the range - Dispensing pumps: Overview of the range

Download the video

Steriwater - instant water sterilization solution: Overview (vost EN - Long version English) - instant water sterilization solution: Overview

Download the video

From sample preparation to bacterial analyses — Overview (vost EN) - Overview

Download the video

From sampling to bacterial counting - Overview

Download the video

Ressources

Ressources

Title
Language
Type
Size
Download
PDF
1.4 Mb
Language: English
FlexiPump brochure
PDF
1.5 Mb
Language: English
Tubings guide
PDF
224.9 kb
Language: English
FlexiPump Scale technical file
PDF
204.5 kb
Language: English
EC Certificate Gravimetric dilutors and Dispensing pumps
PDF
570.7 kb
Language: English, french
ISO 9001 Certificate
PDF
49.2 Mb
Language: English
English catalog
Z
Zip
1.2 Mb
FlexiPump Scale photo
Title
Language
Type
Size
Download
PDF
257.3 kb
Language: English
Application note - Dispensing repeatability of 9 mL from a 2-liter bottle with FlexiPump
PDF
268.3 kb
Language: English
Application note - Dispensing repeatability of 9 mL diluent bag with FlexiPump
PDF
166.6 kb
Language: English
Application note - 50 ML dispensing test with FlexiPump Pro
Title
Language
Type
Size
Download
Title
Language
Type
Size
Download
Title
Language
Type
Size
Download
Title
Language
Type
Size
Download
Z
Zip
330.4 kb
410 130 - Film for printer photo
Z
Zip
743.2 kb
410 150 - Printer photo
Z
Zip
2 Mb
413 002 - 2L bottle (GL45) photo
Z
Zip
1.8 Mb
507 008 - Foot pedal photo
Z
Zip
1 Mb
511 000 - Booster kit photo
Z
Zip
299.8 kb
513 001 - 5L bottle (GL45) photo
Z
Zip
882.8 kb
513 015 - Independent stand for 2 broth bags photo
Z
Zip
302 kb
521 012 - Sticker for printer photo
Z
Zip
2.1 Mb
521 110 - Paper for print photo
Z
Zip
1.1 Mb
561 001 - Handy Gun - Gun photo
Z
Zip
1.2 Mb
561 002 - Adjustable dispensing arm photo
Z
Zip
1.2 Mb
563 350 - BagOpen 3500 for peristaltic pumps (stainless steel)
Title
Language
Type
Size
Download
Z
Zip
2.6 Mb
413 028 - Tube weights 3 mm photo
Z
Zip
220.8 kb
513 011 - Tubings for pump (Ø 4.8 mm) photo
Z
Zip
1.5 Mb
513 020 - Trocar for broth bags photo
Z
Zip
763.3 kb
513 023 - PTFE filters 0.2 µL Ø 25 mm photo
Z
Zip
259.2 kb
513 024 - Nozzle for tubings 4.8 to 8 mm photo
Z
Zip
189.2 kb
513 039 - Tube weights ø 6 mm photo
Z
Zip
251.9 kb
513 040 - Nozzles tubings (Ø 1.6 - 3.2 mm) photo
Z
Zip
643 kb
513 048 - Nozzle cap (Ø 1.6 - 3.2 mm) photo
Z
Zip
812.8 kb
513 052 - Tubings for pump with filter 0.2 µm (Ø 6.4 mm) photo
Z
Zip
199.6 kb
561 301 - Tubings for pump (Ø 1.6 mm) photo
Z
Zip
201.2 kb
561 302 - Tubings for pump (Ø 3.2 mm) photo
Z
Zip
199.9 kb
561 304 - Tubings for pump (Ø 6.4 mm) photo
Z
Zip
197.7 kb
561 305 - Tubings for pump (Ø 8 mm) photo
Z
Zip
397.4 kb
561 401 - Autoclavable GL45 stopper + 0.2 µm filter photo
Z
Zip
395.7 kb
562 051 - Dispensing assembly + Y with 0.2 µm filter (GL45 - Ø 6.4 mm)
Z
Zip
300.5 kb
562 101 - Dispensing assembly + Y (GL45 - Ø 1.6 mm) photo
Z
Zip
325.6 kb
562 102 - Dispensing assembly + Y (GL45 - Ø 3.2 mm) photo
Z
Zip
325 kb
562 103 - Dispensing assembly + Y (GL45 - Ø 4.8 mm) photo
Z
Zip
324.5 kb
562 104 - Dispensing assembly + Y (GL45 - Ø 6.4 mm) photo
Z
Zip
320.8 kb
562 105 - Dispensing assembly + Y (GL45 - Ø 8 mm) photo
Z
Zip
90.4 kb
562 201 - Tubings + Y (Ø 1.6 mm) photo
Z
Zip
218.4 kb
562 202 - Tubings + Y (Ø 3.2 mm) photo
Z
Zip
218.5 kb
562 203 - Tubings + Y (Ø 4.8 mm) photo
Z
Zip
217.3 kb
562 204 - Tubings + Y (Ø 6.4 mm) photo
Z
Zip
214.7 kb
562 205 - Tubings + Y (Ø 8 mm) photo
Z
Zip
127.2 kb
562 400 - Y connectors (tubings Ø 1.6 mm)
Z
Zip
199.5 kb
562 401 - Y connectors (tubings Ø 6.4 - 8 mm) photo
Z
Zip
7.7 Mb
562 402 - Y connectors (tubings Ø 3.2 mm) photo
Z
Zip
668.7 kb
562 403 - Y connectors (tubings Ø 4.8 mm) photo

Spécifications

Spécifications

FlexiPump Scale
Référence 563 000
VUE GÉNÉRALE
Corps tout acier inox 304 L N
Compatible pistolet de distribution N
Traçabilité (imprimante, ordinateur, clé USB) N
Pompe double tête pour haute précision et haut débit N
Balance intégrée N
Autocalibration avec fréquence personnalisable (BREVETÉ) N
Compatible Pack Jumbo N
SPÉCIFICATIONS
Volume distribué en modes dose et multi-dose 50 &#xb5L to 99 L
Volume distribué en mode distribution sur balance 1 mL to 6.5 L
Plage de pesée 0.1 to 6500 g
Résolution de la pesée jusqu'à 200 g 0.01 g
Précision de la pesée 0 to 100 g: ± 0,05 g <br>100 to 6500 g: ± 0.05%
Précision de la distribution typique avec un tuyau Ø int.3,2 mm 9 mL: ± 0.9% - 18 mL: ± 0.5% - 225 mL: ± 0.4%
Plage de précision en mode distribution sur balance 0 to 1% in accurate mode<br>0 to 2% in fast and normal modes<br>(measured for each dispensing)
Modes de distribution Continuous - Dose with/without autocalibration - Multi-dose with/without autocalibration - Dose on scale
Nombre de programmes personnalisables 32
Temps de pause en mode multi-dose Adjustable from 0.1 to 99.9 s
Nombre de distributions pour des tubes de 9 mL 40 x 9 mL tubes in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions)
Nombre de distributions pour des boites de 18 mL 29 x 18 mL plates in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions)
Nombre de distributions pour des sacs de prélèvement 220 mL 8 dispensings of 220 mL in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions)
Nombre de pompes Low pulsation double pump head
Débit 6 mL/min to 6 L/min (in optimal conditions, with jumbo pack)
Vitesse de rotation 10 to 550 rpm
Matière des tubulures Tygon™ (for pump head) and silicon
Connexions 2 x USB type A, USB type B, 3.5 mm jack, weighing platform socket
Tension - Fréquence 100-240 V∼ 50-60 Hz
Fusibles T 2.5A L 250 V 5x20 mm
Puissance 70 W
Garantie 1 year
Indice de protection IP31
Disponibilité des pièces détachées 10 years
En conformité avec ISO 7218, ISO 6887 and FDA BAM (Bacteriological Analytical Manual)
POIDS ET DIMENSIONS
Dimensions (l x p x h) : FlexiPump 16.1 x 33.2 x 20.8 cm + Weighing platform: Ø 17 cm x 5.4 cm
Dimensions (l x p x h) : FlexiPump + Pistolet de distribution (Réf. 561 001) 19.4 x 33.5 x 20.8 cm + Weighing platform: Ø 17 cm x 5.4 cm
Dimensions (l x p x h) : FlexiPump + Bras de distribution ajustable<br>(Réf. 561 002) 40.8 x 39.1 x 43.4 cm + Weighing platform: Ø 17 cm x 5.4 cm
Poids net : FlexiPump 7.50 kg
Poids net : FlexiPump + Pistolet de distribution (Réf. 561 001) 7.65 kg
Poids net : FlexiPump + Bras de distribution ajustable (Réf. 561 002) 8.05 kg
Dimensions emballage (l x p x h) 50 x 40 x 40 cm
Poids brut : FlexiPump 11.26 kg
Poids brut : FlexiPump + Pistolet de distribution (Réf. 561 001) 11.41 kg
Poids brut : FlexiPump + Bras de distribution ajustable (Réf. 561 002) 11.91 kg
TRAÇABILITÉ
Traçabilité Operator name, target weight, measured weight, dispensing mode accuracy, last calibration, date, time, speed, Ø tubing
Liaisons USB type A (printer, USB stick) USB type B (PC)
Export des données Compatible CSV Excel™, Open Office Calc™, LIMS
LIVRÉ AVEC
Colis 2 peristaltic pump heads, 1 weighing platform, 1 x 3.2 mm dispensing set (nozzle + GL45 screw cap + filter + tubing + tube weight), 1 x 6.4 mm dispensing set, 1 user manual, 1 power cord, 1 USB cable, 1 free pack of blender bags, 1 certificate of conformity / warranty card
FlexiPump Scale
Référence 563 000
VUE GÉNÉRALE
Corps tout acier inox 304 L N
Compatible pistolet de distribution N
Traçabilité (imprimante, ordinateur, clé USB) N
Pompe double tête pour haute précision et haut débit N
Balance intégrée N
Autocalibration avec fréquence personnalisable (BREVETÉ) N
Compatible Pack Jumbo N
SPÉCIFICATIONS
Volume distribué en modes dose et multi-dose 50 &#xb5L to 99 L 50 &#xb5L to 99 L
Volume distribué en mode distribution sur balance 1 mL to 6.5 L 1 mL to 6.5 L
Plage de pesée 0.1 to 6500 g 0.1 to 6500 g
Résolution de la pesée jusqu'à 200 g 0.01 g 0.01 g
Précision de la pesée 0 to 100 g: ± 0,05 g <br>100 to 6500 g: ± 0.05% 0 to 100 g: ± 0,05 g <br>100 to 6500 g: ± 0.05%
Précision de la distribution typique avec un tuyau Ø int.3,2 mm 9 mL: ± 0.9% - 18 mL: ± 0.5% - 225 mL: ± 0.4% 9 mL: ± 0.9% - 18 mL: ± 0.5% - 225 mL: ± 0.4%
Plage de précision en mode distribution sur balance 0 to 1% in accurate mode<br>0 to 2% in fast and normal modes<br>(measured for each dispensing) 0 to 1% in accurate mode<br>0 to 2% in fast and normal modes<br>(measured for each dispensing)
Modes de distribution Continuous - Dose with/without autocalibration - Multi-dose with/without autocalibration - Dose on scale Continuous - Dose with/without autocalibration - Multi-dose with/without autocalibration - Dose on scale
Nombre de programmes personnalisables 32 32
Temps de pause en mode multi-dose Adjustable from 0.1 to 99.9 s Adjustable from 0.1 to 99.9 s
Nombre de distributions pour des tubes de 9 mL 40 x 9 mL tubes in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions) 40 x 9 mL tubes in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions)
Nombre de distributions pour des boites de 18 mL 29 x 18 mL plates in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions) 29 x 18 mL plates in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions)
Nombre de distributions pour des sacs de prélèvement 220 mL 8 dispensings of 220 mL in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions) 8 dispensings of 220 mL in 1 min (in multi-dose mode with a delay of 0.1 s under optimal conditions)
Nombre de pompes Low pulsation double pump head Low pulsation double pump head
Débit 6 mL/min to 6 L/min (in optimal conditions, with jumbo pack) 6 mL/min to 6 L/min (in optimal conditions, with jumbo pack)
Vitesse de rotation 10 to 550 rpm 10 to 550 rpm
Matière des tubulures Tygon™ (for pump head) and silicon Tygon™ (for pump head) and silicon
Connexions 2 x USB type A, USB type B, 3.5 mm jack, weighing platform socket 2 x USB type A, USB type B, 3.5 mm jack, weighing platform socket
Tension - Fréquence 100-240 V∼ 50-60 Hz 100-240 V∼ 50-60 Hz
Fusibles T 2.5A L 250 V 5x20 mm T 2.5A L 250 V 5x20 mm
Puissance 70 W 70 W
Garantie 1 year 1 year
Indice de protection IP31 IP31
Disponibilité des pièces détachées 10 years 10 years
En conformité avec ISO 7218, ISO 6887 and FDA BAM (Bacteriological Analytical Manual) ISO 7218, ISO 6887 and FDA BAM (Bacteriological Analytical Manual)
POIDS ET DIMENSIONS
Dimensions (l x p x h) : FlexiPump 16.1 x 33.2 x 20.8 cm + Weighing platform: Ø 17 cm x 5.4 cm 16.1 x 33.2 x 20.8 cm + Weighing platform: Ø 17 cm x 5.4 cm
Dimensions (l x p x h) : FlexiPump + Pistolet de distribution (Réf. 561 001) 19.4 x 33.5 x 20.8 cm + Weighing platform: Ø 17 cm x 5.4 cm 19.4 x 33.5 x 20.8 cm + Weighing platform: Ø 17 cm x 5.4 cm
Dimensions (l x p x h) : FlexiPump + Bras de distribution ajustable<br>(Réf. 561 002) 40.8 x 39.1 x 43.4 cm + Weighing platform: Ø 17 cm x 5.4 cm 40.8 x 39.1 x 43.4 cm + Weighing platform: Ø 17 cm x 5.4 cm
Poids net : FlexiPump 7.50 kg 7.50 kg
Poids net : FlexiPump + Pistolet de distribution (Réf. 561 001) 7.65 kg 7.65 kg
Poids net : FlexiPump + Bras de distribution ajustable (Réf. 561 002) 8.05 kg 8.05 kg
Dimensions emballage (l x p x h) 50 x 40 x 40 cm 50 x 40 x 40 cm
Poids brut : FlexiPump 11.26 kg 11.26 kg
Poids brut : FlexiPump + Pistolet de distribution (Réf. 561 001) 11.41 kg 11.41 kg
Poids brut : FlexiPump + Bras de distribution ajustable (Réf. 561 002) 11.91 kg 11.91 kg
TRAÇABILITÉ
Traçabilité Operator name, target weight, measured weight, dispensing mode accuracy, last calibration, date, time, speed, Ø tubing Operator name, target weight, measured weight, dispensing mode accuracy, last calibration, date, time, speed, Ø tubing
Liaisons USB type A (printer, USB stick) USB type B (PC) USB type A (printer, USB stick) USB type B (PC)
Export des données Compatible CSV Excel™, Open Office Calc™, LIMS Compatible CSV Excel™, Open Office Calc™, LIMS
LIVRÉ AVEC
Colis 2 peristaltic pump heads, 1 weighing platform, 1 x 3.2 mm dispensing set (nozzle + GL45 screw cap + filter + tubing + tube weight), 1 x 6.4 mm dispensing set, 1 user manual, 1 power cord, 1 USB cable, 1 free pack of blender bags, 1 certificate of conformity / warranty card 2 peristaltic pump heads, 1 weighing platform, 1 x 3.2 mm dispensing set (nozzle + GL45 screw cap + filter + tubing + tube weight), 1 x 6.4 mm dispensing set, 1 user manual, 1 power cord, 1 USB cable, 1 free pack of blender bags, 1 certificate of conformity / warranty card

Conforme à une utilisation selon les Bonnes Pratiques de Laboratoire (BPL).

Produit fabriqué pour Interscience par Interlab, entreprise certifiée ISO 9001.

Accessoires

Accessoires

Film for printer

Ref. 410 130

Printer

Ref. 410 150

2L bottle (GL45)

Ref. 413 002

Foot pedal

Ref. 507 008

Booster kit

Ref. 511 500

5L bottle (GL45)

Ref. 513 001

Independent stand for broth bags

Ref. 513 015

Sticker for printer

Ref. 521 012

Paper for printer

Ref. 521 110

Handy Gun

Ref. 561 001

Adjustable dispensing arm

Ref. 561 002

BagOpen 3500 for peristaltic pumps (stainless steel)

Ref. 563 350

Film for printer

Ref. 410 130

Thermal transfer film for printer

Box dimensions: 12x10x8 cm
Gross weight: 0.08 kg
Quantity: 1

Printer

Ref. 410 150

Thermal printer (RS 232 and USB output). Delivered with 1 thermal transfer film + power cable + USB cable

Box dimensions: 37x35x25 cm
Gross weight: 3.50 kg
Quantity: 1

2L bottle (GL45)

Ref. 413 002

Set of 3 GL45 glass bottle (2L), autoclavable

Box: 37x37x37 cm
Gross weight: 4.10 kg
Quantity: 3

Foot pedal

Ref. 507 008

For hands-free dispensing. Connection with a 3.5 mm Jack

Box: 15x10x10 cm
Gross weight: 0.15 kg
Quantity: 1

Booster kit

Ref. 511 500

Pump extension with stainless steel roller to speed up dispensing. Comes with 2 silicone hoses for pump (20 cm each), internal diameter 6.4 mm + 2 “Y” connectors.

Box: 39x17x15 cm
Gross weight: 0.38 kg
Quantity: 1

5L bottle (GL45)

Ref. 513 001

GL45 glass bottle (5L), autoclavable

Box: 37x35x25 cm
Gross weight: 1.70 kg
Quantity: 1

Independent stand for broth bags

Ref. 513 015

Independent stand for 2 broth bags

Box: 59x37x29 cm
Gross weight: 1.90 kg
Quantity: 1

Sticker for printer

Ref. 521 012

Set of 2 rolls of 1000 stickers for thermal printer - Label size: 70 x 45 mm

Box dimensions: 20x10x10 cm
Gross weight: 1.00 kg
Quantity: 2x1000

Paper for printer

Ref. 521 110

Set of 2 thermal paper rolls for printer

Box dimensions: 25x10x10 cm
Gross weight: 1.50 kg
Quantity: 2

Handy Gun

Ref. 561 001

Dispensing control with handy gun including electronic start button

Box dimensions: 15x15x5 cm
Gross weight: 0.12 kg
Quantity: 1

Adjustable dispensing arm

Ref. 561 002

To fill various containers

Box dimensions: 34x22x12 cm
Gross weight: 0.60 kg
Quantity: 1

BagOpen 3500 for peristaltic pumps (stainless steel)

Ref. 563 350

3500 mL bag opener/holder + Geckogrip. Compatible with FlexiPump Scale.

Box dimensions: 38.5x17x23 cm
Gross weight: 1.2 kg
Quantity: 1

Tubulures

Tubulures

B FlexiPump Pro dispensing assembly + Y
  • C Tube weights
  • D Trocar
  • E PTFE filter
  • F Autoclavable GL45 stopper
  • G Silicone tubings
  • I Y connectors
  • J TygonTM tubings for pump
  • K TygonTM tubings for pump with filter 0.2 µm
  • L Nozzles
  • M Protection cap

C

Tube weights (Ø 3 mm)

Ref. 413 028
J

Tubings for pump (Ø 4.8 mm)

Ref. 513 011
D

Trocar

Ref. 513 020
E

PTFE filters 0.2 µm
(Ø 25 mm)

Ref. 513 023
L + M

Nozzles
(tubings Ø 4.8 - 8 mm)

Ref. 513 024
C

Tube weights
(Ø 6 mm)

Ref. 513 039
L + M

Nozzles (tubings Ø 1.6 - 3.2 mm)

Ref. 513 040
M

Cap
(Ø 1.6 - 3.2 mm)

Ref. 513 048
M

Cap
(Ø 4.8 - 8 mm)

Ref. 513 049
K

Tubings for pump Steriwater (Ø 6.4 mm)

Ref. 513 052
J

Tubings for pump (Ø 1.6 mm)

Ref. 561 301
J

Tubings for pump
(Ø 3.2 mm)

Ref. 561 302
J

Tubings for pump
(Ø 6.4 mm)

Ref. 561 304
J

Tubings for pump (Ø 8 mm)

Ref. 561 305
E + F

Autoclavable GL45 stopper + 0.2 µm filter

Ref. 561 401
B

Dispensing assembly + Y Steriwater (GL45 - Ø 6.4 mm)

Ref. 562 051
B

Dispensing assembly + Y
(GL45 - Ø 1.6 mm)

Ref. 562 101
B

Dispensing assembly + Y
(GL45 - Ø 3.2 mm)

Ref. 562 102
B

Dispensing assembly + Y
(GL45 - Ø 4.8 mm)

Ref. 562 103
B

Dispensing assembly + Y
(GL45 - Ø 6.4 mm)

Ref. 562 104
B

Dispensing assembly + Y
(GL45 - Ø 8 mm)

Ref. 562 105
G + J + I

Tubings + Y
(Ø 1.6 mm)

Ref. 562 201
G + J + I

Tubings + Y
(Ø 3.2 mm)

Ref. 562 202
G + J + I

Tubings + Y
(Ø 4.8 mm)

Ref. 562 203
G + J + I

Tubings + Y
(Ø 6.4 mm)

Ref. 562 204
G + J + I

Tubings + Y
(Ø 8 mm)

Ref. 562 205
I

Y connectors
(tubings Ø 1.6 mm)

Ref. 562 400
I

Y connectors
(tubings Ø 6.4 - 8 mm)

Ref. 562 401
I

Y connectors
(tubings Ø 3.2 mm)

Ref. 562 402
I

Y connectors
(tubings Ø 4.8 mm)

Ref. 562 403
C

Tube weights (Ø 3 mm)

Ref. 413 028

Set of 5 tube weights (inner Ø 3 mm)

Box dimensions: 12x8 cm
Gross weight: 0.04 kg
Quantity: 5

J

Tubings for pump (Ø 4.8 mm)

Ref. 513 011

Set of 6 TygonTM tubings for pump part (20 cm). inner Ø 4.8 mm

Box: 26x21x11 cm
Gross weight: 0.06 kg
Quantity: 6

D

Trocar

Ref. 513 020

Stainless steel trocar + cap for broth bags

Box: 12x10x8 cm
Gross weight: 0.03 kg
Quantity: 1

E

PTFE filters 0.2 µm
(Ø 25 mm)

Ref. 513 023

Set of 5 autoclavable PTFE filters (0.2 µm) for GL45 bottle

Box: 12x10x8 cm
Gross weight: 0.02 kg
Quantity: 5

L + M

Nozzles
(tubings Ø 4.8 - 8 mm)

Ref. 513 024

Set of 5 PEEK nozzles + caps for tubings from 4.8 to 8 mm inner diameter

Box: 15x15x6 cm
Gross weight: 0.10 kg
Quantity: 5

C

Tube weights
(Ø 6 mm)

Ref. 513 039

Set of 5 PTFE tube weights - Ø 6 mm

Box: 8x12 cm
Gross weight: 0.30 kg
Quantity: 5

L + M

Nozzles (tubings Ø 1.6 - 3.2 mm)

Ref. 513 040

Set of 5 PEEK nozzles + caps for tubings from 1.6 to 3.2 mm inner diameter

Box: 8x12 cm
Gross weight: 0.07 kg
Quantity: 5

M

Cap
(Ø 1.6 - 3.2 mm)

Ref. 513 048

Set of 5 protections for nozzles (tubings Ø 1.6 - 3.2 mm) or trocar.

Box dimensions: 8x12 cm
Gross weight: 0.01 kg
Quantity: 10

M

Cap
(Ø 4.8 - 8 mm)

Ref. 513 049

Set of 5 protections for nozzles (tubings Ø 4.8 - 8 mm)

Box: 8x12 cm
Gross weight: 0.01 kg
Quantity: 5

K

Tubings for pump Steriwater (Ø 6.4 mm)

Ref. 513 052

Set of 2 TygonTM tubing for pump part (50 cm) + 2 filters 0.2 µm. inner Ø 6.4 mm

Box dimensions: 22x36x10 cm
Gross weight: 0.23 kg
Quantity: 2

J

Tubings for pump (Ø 1.6 mm)

Ref. 561 301

Set of 6 TygonTM tubings for pump part (20 cm). Inner Ø 1.6 mm

Box dimensions: 26x21.1x11 cm
Gross weight: 0.03 kg
Quantity: 6

J

Tubings for pump
(Ø 3.2 mm)

Ref. 561 302

Set of 6 TygonTM tubings for pump part (20 cm). Inner Ø 3.2 mm

Box dimensions: 26x21.1x11 cm
Gross weight: 0.04 kg
Quantity: 6

J

Tubings for pump
(Ø 6.4 mm)

Ref. 561 304

Set of 6 TygonTM tubings for pump part (20 cm). Inner Ø 6.4 mm

Box dimensions: 26x21.1x11 cm
Gross weight: 0.07 kg
Quantity: 6

J

Tubings for pump (Ø 8 mm)

Ref. 561 305

Set of 6 TygonTM tubings for pump part (20 cm). Inner Ø 8 mm

Box dimensions: 26x21.1x11 cm
Gross weight: 0.08 kg
Quantity: 6

E + F

Autoclavable GL45 stopper + 0.2 µm filter

Ref. 561 401

Autoclavable GL45 stopper for GL45 bottle + 0.2 µm filter

Box dimensions: 10x12 cm
Gross weight: 0.04 kg
Quantity: 1

B

Dispensing assembly + Y Steriwater (GL45 - Ø 6.4 mm)

Ref. 562 051

Set of silicone tubings inner Ø 6.4 mm + GL45 screw cap + filter + tube weight + nozzle + cap + "Y" + 2 filters 0.2 µm - Compatible with FlexiPump Pro and FlexiPump Scale

Box dimensions: 22x36x10 cm
Gross weight: 0.4 kg
Quantity: 1

B

Dispensing assembly + Y
(GL45 - Ø 1.6 mm)

Ref. 562 101

Set of silicone tubings inner Ø 1.6 mm + GL45 screw cap + tube weight + nozzle + cap + filter + "Y"

Box dimensions: 39x27x15 cm
Gross weight: 0.13 kg
Quantity: 1

B

Dispensing assembly + Y
(GL45 - Ø 3.2 mm)

Ref. 562 102

Set of silicone tubings inner Ø 3.2 mm + GL45 screw cap + tube weight + nozzle + cap + filter + "Y"

Box dimensions: 20x20x10 cm
Gross weight: 0.20 kg
Quantity: 1

B

Dispensing assembly + Y
(GL45 - Ø 4.8 mm)

Ref. 562 103

Set of silicone tubings inner Ø 4.8 mm + GL45 screw cap + tube weight + nozzle + cap + filter + "Y"

Box dimensions: 35x21x10 cm
Gross weight: 0.25 kg
Quantity: 1

B

Dispensing assembly + Y
(GL45 - Ø 6.4 mm)

Ref. 562 104

Set of silicone tubings inner Ø 6.4 mm + GL45 screw cap + tube weight + nozzle + cap + filter + "Y"

Box dimensions: 25x20x10 cm
Gross weight: 0.25 kg
Quantity: 1

B

Dispensing assembly + Y
(GL45 - Ø 8 mm)

Ref. 562 105

Set of silicone tubings inner Ø 8 mm + GL45 screw cap + tube weight + nozzle + cap + filter + "Y"

Box dimensions: 35x21x10 cm
Gross weight: 0.25 kg
Quantity: 1

G + J + I

Tubings + Y
(Ø 1.6 mm)

Ref. 562 201

Set of 5 dispensing tubings (silicone tubings + TygonTM tubings + "Y" connectors) - inner Ø 1.6 mm

Box dimensions: 25x25x10 cm
Gross weight: 0.40 kg
Quantity: 5

G + J + I

Tubings + Y
(Ø 3.2 mm)

Ref. 562 202

Set of 5 dispensing tubings (silicone tubings + TygonTM tubings + "Y" connectors) - inner Ø 3.2 mm

Box dimensions: 30x20x10 cm
Gross weight: 0.50 kg
Quantity: 5

G + J + I

Tubings + Y
(Ø 4.8 mm)

Ref. 562 203

Set of 5 dispensing tubings (silicone tubings + TygonTM tubings + "Y" connectors) - inner Ø 4.8 mm

Box dimensions: 30x20x10 cm
Gross weight: 0.65 kg
Quantity: 5

G + J + I

Tubings + Y
(Ø 6.4 mm)

Ref. 562 204

Set of 5 dispensing tubings (silicone tubings + TygonTM tubings + "Y" connectors) - inner Ø 6.4 mm

Box dimensions: 30x20x20 cm
Gross weight: 0.65 kg
Quantity: 5

G + J + I

Tubings + Y
(Ø 8 mm)

Ref. 562 205

Set of 5 dispensing tubings (silicone tubings + TygonTM tubings + "Y" connectors) - inner Ø 8 mm

Box dimensions: 30x20x20 cm
Gross weight: 0.70 kg
Quantity: 5

I

Y connectors
(tubings Ø 1.6 mm)

Ref. 562 400

Set of 6 "Y" plastic connectors for Ø 1.6 mm tubings

Box dimensions: 12x8 cm
Gross weight: 0.02 kg
Quantity: 6

I

Y connectors
(tubings Ø 6.4 - 8 mm)

Ref. 562 401

Set of 6 "Y" plastic connectors for Ø 6.4 and 8 mm tubings

Box dimensions: 12x8 cm
Gross weight: 0.02 kg
Quantity: 6

I

Y connectors
(tubings Ø 3.2 mm)

Ref. 562 402

Set of 6 "Y" plastic connectors for Ø 3.2 mm tubings

Box dimensions: 12x8 cm
Gross weight: 0.05 kg
Quantity: 6

I

Y connectors
(tubings Ø 4.8 mm)

Ref. 562 403

Set of 6 "Y" plastic connectors for Ø 4.8 mm tubings

Dimensions de l’emballage : 12x8 cm
Poids brut : 0,01 kg
Quantité : 6

© Interscience 2026. Tous droits réservés