DiluFlow Elite 1 kg

Gravimetric dilutor 1 kg

Designed for pharmaceutics and cosmetics

Ref. 503 101 (single pump)
Ref. 503 201 (double pump)

DiluFlow Elite 1 kg

Gravimetric dilutor 1 kg

Designed for pharmaceutics and cosmetics

Ref. 503 101 (single pump)
Ref. 503 201 (double pump)

The DiluFlow Elite automatically dilutes a solid sample in seconds, with the appropriate weight of diluent, up to a total weight of 1000 g. It offers the best solution to prepare your samples in the pharmaceutical and cosmetic industries, as well as animal health. Its full traceability enables the recording of all operations.

  • 225 mL in 8 seconds
  • Dilution factor: 2 to 1000, customizable fractions
  • Dilution accuracy: > 99%*
  • Max weight: 1000 g
  • Max number of pumps: 2 integrated + 4 external

*with booster in standard or accurate mode

Presentation


DiluFlow - Cosmétique et pharmaceutique

For pharmaceutical and cosmetics industries

The DiluFlow Elite 1 kg is adapted to small volumes, as required in pharmaceutical and cosmetics industries. Its flexibility enables the preparation of the samples in tubes, pots...

High accuracy

The DiluFlow Elite 1 kg allows an accurate dilution of all sample types from 1 to 100 g (at 1/10th) with an accuracy of > 99%.


 DiluFlow - Keyboard


 DiluFlow - Connectivity and traceability

Connectivity and full traceability

The DiluFlow Elite is programmable through its 24 customizable programs. Traceability is ensured by a bidirectional LIMS ethernet connection. DiluFlow Elite exports the analyses data to printer, USB key, ExcelTM, Open OfficeTM, CSV and LIMS..


 DiluFlow - Robotic arm

Robotic arm and protective plate

The robotic arm enables you to place the sample safely in the bag without risk of cross contamination. Tested for over 1.3 million cycles, its reliability is guaranteed. The protective plate protects the beaker from contact with the sample.


DiluFlow Hotte EN

Ultra-low profile

Widest possible opening for the bag and lowest loading threshold on the market! With redesigned ergonomics, the ultra-low profile allows optimal comfort of use, especially under a laminar flow hood.


DiluFlow - Removable recovery box

Removable drip tray

In case of splashing, the drain tray is removable for rinsing and avoids tedious cleaning.
PATENTED


DiluFlow - GeckoGrip system

GeckoGrip holding system

This patented system replaces adhesive putty and keeps the analysis bag glue-free, even on a wet surface.
PATENTED

LightCode

LightCode is a bright and intuitive indicator of the status of dilution. It allows you to check the accuracy at a glance.


DiluFlow green Lightcode

Green
Accuracy > 98%


DiluFlow orange Lightcode

Orange
Accuracy > 95%


DiluFlow red Lightcode

Red
Accuracy < 95%


DiluFlow blue Lightcode

Blue
Scale stabilizing


DiluFlow - auto tare mode

Autotare Function


FlexiPump - Handy Gun

Multi-distribution mode


DiluFlow - BagOpen magnetized

Magnetic BagOpen


DiluFlow - diluents

Up to 6 diluents

Applications

DiluFlow Elite 1 kg is used for the preparation of samples from 1g to 10g diluted at 1/10th. It enables you to prepare tubes, or pots for samples to analyse. For example: active ingredients, cream, make-up...


Application - Pharmaceutical


Application - Cosmetics


Applications - Veterinary


Application - Public research

Videos

Videos

DiluFlow range - Gravimetric dilutors

Download the video

Unboxing - Overview of the DiluFlow Pro

Download the video

Downloads

Downloads

Title
Language
Type
Size
Download
Brochure DiluFlow range
English
PDF
6.4 Mb
Technical file DiluFlow Elite 1 kg
English
PDF
350.9 kb
ROHS - WEEE Certificate
English
PDF
114.2 kb
CE Certificate
English
PDF
113.1 kb
ISO 9001 Certificate
English
PDF
121.8 kb
English catalog
English
PDF
5.9 Mb
Z
Photo DiluFlow range
Zip
1.2 Mb
Z
Photo DiluFlow Elite 1 kg - 503 205
Zip
877.6 kb
Title
Language
Type
Size
Download
Z
Photo Printer - 410 150
Zip
291.1 kb
Z
Photo BagOpen 400 for dilutors - 505 001
Zip
1 Mb
Z
Photo Weighing platform - 505 002
Zip
671.6 kb
Z
Photo Tongs platform - 505 003
Zip
677.5 kb
Z
Photo Adjustable distribution system Diluflow Pro / Elite - 505 005
Zip
617.7 kb
Z
Photo Pump module - 505 007
Zip
660 kb
Z
Photo Foot pedal - 507 008
Zip
1.8 Mb
Z
Photo Independent stand for 2 broth bags - 513 015
Zip
862.1 kb
Z
Photo Paper for print - 521 110
Zip
2 Mb
Z
Photo Bar-code reader - 522 000
Zip
1.9 Mb
Z
Photo Handy Gun - 561 001
Zip
1.7 Mb
Z
Photo Handy Gun - Gun - 561 001
Zip
1 Mb
Z
Photo HandyGun - Mouse - 561 001
Zip
324.5 kb
Z
Photo Handy Gun - Pen - 561 001
Zip
980.3 kb
Title
Language
Type
Size
Download
Z
Photo Trocar for broth bags - 513 020
Zip
1.4 Mb
Z
Photo PTFE filters 0.2 μm Ø 25 mm - 513 023
Zip
745.4 kb
Z
Photo Stainless steel nozzle for tubings 4.8 to 8 mm - 513024
Zip
1.6 Mb
Z
Photo Tube weights ø 6 mm - 513 039
Zip
706.1 kb
Z
Photo Nozzles tubings Ø 1.6 - 3.2 mm - 513 040
Zip
491.3 kb

Specifications

Specifications

DiluFlow Elite 1 kg (single pump)
Reference 503 101
BagOpen height < 30 cm N
Removable drip tray (patented) N
BagOpen with GeckoGrip system (patented) N
Magnetic stand for BagOpen (patented shape) N
LightCode: color status LED N
Compatible with booster kit N
304L stainless steel body N
Stainless casting electromechanical core N
Robotic arm N
Protection for tubing nozzle N
Up to 6 pumps N
Multi-dispensing mode (patented) N
Powder mode N
24 editable programs N
Bidirectional connectivity N
Auto-tare function N
Weighing mode N
1 g dilution to 1/10 N
Resolution up to 200 g 0.01 g
Weighing range 0.1 to 1000 g
Max weight without support 1500 g
Weighing accuracy 0 g to 20 g : ± 0.01 g / 20 g to 1000 g : ± 0.1%
Mini weight for dilution 0.5 g (with a dilution factor of 10)
Mini weight for distribution 5 g
Dilution factor 2 to 1000, customizable fractions
Dilution/distribution accuracy > 99% (with booster kit in Standard or Accurate mode)
Dilution time for a 25g sample diluted to 1/10 < 8 s (with booster kit in Fast mode)
Distribution time for 90 mL < 6 s (with booster kit in Fast mode)
Distribution time for 225 mL < 9 s (with booster kit in Fast mode)
Max number of pumps 2 integrated + 4 external
Dilution/distribution mode Fast / Standard / Accurate
Traceability Printer / Export to ExceTM file / CSV file Export on USB key / LIMS
Exported data Sample weight / Total weight / Dilution factor / Dilution accuracy / Diluent / Sample number / Diluent lot number / Date / Time / Last calibration date / Name of operator / Name of program
Connection 2 USB ports (type A) to connect a printer, keyboard, bar-code reader, USB key / 1 USB port (type B) to connect a printer / Jack socket to connect a foot pedal / Handy gun / Ethernet connection for LIMS
Net weight 12.6 kg
Dimensions (w x d x h) 31 x 42 x 38 cm
Box (w x d x h) 54.5 x 54.5 x 55 cm
Gross weight 18 kg
Language English, French
Voltage - Frequencies 100-240 V~ 50/60 Hz
Fuses T3, 15A L 250V 5x20 mm
Power 60 W
International protection marking 32
Warranty 1 year
In compliance with ISO 7218 - ISO 6887
1 drip tray 400, 1 or 2 pumps, 1 protection for distribution nozzle, 1 distribution assembly (GL45 - Ø 3.2 mm) per pump, 1 USB key, 1 USB cable, 1 power cord, 1 BagOpen 400 for dilutor, User's Manual, 1 conformity certificate, 1 warranty card, 10 GeckoGrip, 1 pack of adhesive putty, 1 Allen wrench, blender bags samples
DiluFlow Elite 1 kg (double pump)
Reference 503 201
BagOpen height < 30 cm N
Removable drip tray (patented) N
BagOpen with GeckoGrip system (patented) N
Magnetic stand for BagOpen (patented shape) N
LightCode: color status LED N
Compatible with booster kit N
304L stainless steel body N
Stainless casting electromechanical core N
Robotic arm N
Protection for tubing nozzle N
Up to 6 pumps N
Multi-dispensing mode (patented) N
Powder mode N
24 editable programs N
Bidirectional connectivity N
Auto-tare function N
Weighing mode N
1 g dilution to 1/10 N
Resolution up to 200 g 0.01 g
Weighing range 0.1 to 1000 g
Max weight without support 1500 g
Weighing accuracy 0 g to 20 g : ± 0.01 g / 20 g to 1000 g : ± 0.1%
Mini weight for dilution 0.5 g (with a dilution factor of 10)
Mini weight for distribution 5 g
Dilution factor 2 to 1000, customizable fractions
Dilution/distribution accuracy > 99% (with booster kit in Standard or Accurate mode)
Dilution time for a 25g sample diluted to 1/10 < 8 s (with booster kit in Fast mode)
Distribution time for 90 mL < 6 s (with booster kit in Fast mode)
Distribution time for 225 mL < 9 s (with booster kit in Fast mode)
Max number of pumps 2 integrated + 4 external
Dilution/distribution mode Fast / Standard / Accurate
Traceability Printer / Export to ExcelTM file / CSV file Export on USB key / LIMS
Exported data Sample weight / Total weight / Dilution factor / Dilution accuracy / Diluent / Sample number / Diluent lot number / Date / Time / Last calibration date / Name of operator / Name of program
Connection 2 USB ports (type A) to connect a printer, keyboard, bar-code reader, USB key / 1 USB port (type B) to connect a printer / Jack socket to connect a foot pedal / Handy gun / Ethernet connection for LIMS
Net weight 14.8 kg
Dimensions (w x d x h) 37 x 42 x 38 cm
Box (w x d x h) 54.5 x 54.5 x 55 cm
Gross weight 20.6 kg
Language English, French
Voltage - Frequencies 100-240 V~ 50/60 Hz
Fuses T3, 15A L 250V 5x20 mm
Power 60 W
International protection marking 32
Warranty 1 year
In compliance with ISO 7218 - ISO 6887
1 drip tray 400, 1 or 2 pumps, 1 protection for distribution nozzle, 1 distribution assembly (GL45 - Ø 3.2 mm) per pump, 1 USB key, 1 USB cable, 1 power cord, 1 BagOpen 400 for dilutor, User's Manual, 1 conformity certificate, 1 warranty card, 10 GeckoGrip, 1 pack of adhesive putty, 1 Allen wrench, blender bags samples
DiluFlow Elite 1 kg (single pump) DiluFlow Elite 1 kg (double pump)
Reference 503 101 503 201
BagOpen height < 30 cm N N
Removable drip tray (patented) N N
BagOpen with GeckoGrip system (patented) N N
Magnetic stand for BagOpen (patented shape) N N
LightCode: color status LED N N
Compatible with booster kit N N
304L stainless steel body N N
Stainless casting electromechanical core N N
Robotic arm N N
Protection for tubing nozzle N N
Up to 6 pumps N N
Multi-dispensing mode (patented) N N
Powder mode N N
24 editable programs N N
Bidirectional connectivity N N
Auto-tare function N N
Weighing mode N N
1 g dilution to 1/10 N N
Resolution up to 200 g 0.01 g
Weighing range 0.1 to 1000 g
Max weight without support 1500 g
Weighing accuracy 0 g to 20 g : ± 0.01 g / 20 g to 1000 g : ± 0.1%
Mini weight for dilution 0.5 g (with a dilution factor of 10)
Mini weight for distribution 5 g
Dilution factor 2 to 1000, customizable fractions
Dilution/distribution accuracy > 99% (with booster kit in Standard or Accurate mode)
Dilution time for a 25g sample diluted to 1/10 < 8 s (with booster kit in Fast mode)
Distribution time for 90 mL < 6 s (with booster kit in Fast mode)
Distribution time for 225 mL < 9 s (with booster kit in Fast mode)
Max number of pumps 2 integrated + 4 external
Dilution/distribution mode Fast / Standard / Accurate
Traceability Printer / Export to ExceTM file / CSV file Export on USB key / LIMS
Exported data Sample weight / Total weight / Dilution factor / Dilution accuracy / Diluent / Sample number / Diluent lot number / Date / Time / Last calibration date / Name of operator / Name of program
Connection 2 USB ports (type A) to connect a printer, keyboard, bar-code reader, USB key / 1 USB port (type B) to connect a printer / Jack socket to connect a foot pedal / Handy gun / Ethernet connection for LIMS
Net weight 12.6 kg 14.8 kg
Dimensions (w x d x h) 31 x 42 x 38 cm 37 x 42 x 38 cm
Box (w x d x h) 54.5 x 54.5 x 55 cm
Gross weight 18 kg 20.6 kg
Language English, French
Voltage - Frequencies 100-240 V~ 50/60 Hz
Fuses T3, 15A L 250V 5x20 mm
Power 60 W
International protection marking 32
Warranty 1 year
In compliance with ISO 7218 - ISO 6887
1 drip tray 400, 1 or 2 pumps, 1 protection for distribution nozzle, 1 distribution assembly (GL45 - Ø 3.2 mm) per pump, 1 USB key, 1 USB cable, 1 power cord, 1 BagOpen 400 for dilutor, User's Manual, 1 conformity certificate, 1 warranty card, 10 GeckoGrip, 1 pack of adhesive putty, 1 Allen wrench, blender bags samples

Calibrated according to the G.L.P (Good Laboratory Practice)

Products made for INTERSCIENCE by Interlab, an ISO 9001 certified company.

Accessories

Accessories

Film for printer

Ref. 410 130

Thermal transfer film

Printer

Ref. 410 150

Thermal printer (RS 232 and USB output)

2L bottle (GL45)

Ref. 413 002

2 L GL45 glass bottle

Pump module

Ref. 505 001

External module with single pump + Set of silicone tubings inner ø 6.4 mm

Weighing platform

Ref. 505 002

To weigh and support a container

Tongs platform

Ref. 505 003

To hold a tube (ø 10 to 60 mm)

Adjustable distribution system

Ref. 505 005

Ideal to fill various containers

6 nozzles holder

Ref. 505 008

Can hold up to 6 nozzles

GeckoGrip for BagOpen 400/3500

Ref. 505 009

Set of 10 adhesives for DiluFlow BagOpen 400 and 3500

Integrable stand for broth bags

Ref. 505 010

Integrated to the unit, to hold one broth bag

BagOpen 80/100 mL for dilutors

Ref. 505 014

Bag holder for 80/100 mL bags for DiluFlow

GeckoGrip for BagOpen 80/100

Ref. 505 015

Set of 10 adhesives for DiluFlow BagOpen 80/100

BagOpen 400 for dilutors (stainless steel)

Ref. 505 016

Stainless steel stand for 400 mL bags

Foot pedal

Ref. 507 008

For hands-free dispensing. Connection with a 3.5 mm Jack

Booster kit

Ref. 511 000

Booster pump + 2 silicone tubings for pump part (20 cm each), inner ø 6.4 mm + 2 “Y”

Bouteille 5L (GL45)

Ref. 513 001

Bouteille autoclavable 5L

Certified standard weight (500 g)

Ref. 513 005

500 g COFRAC calibrated weight, type F1

Booster kit dispensing assembly (GL45 - Ø 3.2 mm)

Ref. 513 008

Set of silicone tubings inner ø 3.2 mm + GL45 screw cap + tube weight + nozzle + filter "Y"

Independent stand for broth bags

Ref. 513 015

Independent stand for 2 broth bags

Sticker for printer

Ref. 521 012

Labels roll for thermal printer - Label size: 70 x 45 mm

Paper for printer

Ref. 521 110

Thermal paper roll for printer (x2)

Bar-code reader (1D)

Ref. 522 000

Handy Gun

Ref. 561 001

Dispensing control with handy gun including electronic start button

Tubings

Tubings

Adjustable nozzles (L 23.5 cm - tubings Ø 3.2 mm)

Ref. 505 012

Set of 5 adjustable nozzles (Length: 23.5 cm - For inner ø 3.2 mm tubings)

Tubings + Y (Ø 3.2 mm)

Ref. 513 009

Set of 5 silicone tubings for booster kit inner ø 3.2 mm with plastic connectors "Y"

Trocar

Ref. 513 020

Trocar for broth bags

PTFE filters 0.2 µm (Ø 25 mm)

Ref. 513 023

Set of 5 autoclavable filters (0.2 µm) for GL45 bottle

Nozzles (tubings Ø 4.8 - 8 mm)

Ref. 513 024

Set of 5 stainless steel nozzle for tubings from 4.8 to 8 mm inner diameter

Tube weights (ø 6 mm)

Ref. 513 039

Set of 5 tube weights - ø 6 mm

Booster kit dispensing assembly (GL45 - Ø 6.4 mm)

Ref. 513 041

Set of silicone tubings inner ø 6.4 mm + GL45 screw cap + tube weight + nozzle + filter + "Y"

Tubings + Y (Ø 6.4 mm)

Ref. 513 042

Set of 5 silicone tubings inner ø 6.4 mm with plastic connectors "Y"

Dispensing assembly (GL45 - Ø 6.4 mm)

Ref. 513 043

Set of silicone tubings inner ø 6.4 mm + GL45 screw cap + tube weight + nozzle + filter

Tubings (Ø 6.4 mm)

Ref. 513 044

Set of 5 silicone tubings inner ø 6.4 mm

Dispensing assembly (GL45 - Ø 3.2 mm)

Ref. 513 045

Set of silicone tubings inner ø 3.2 mm + GL45 screw cap + tube weight + nozzle + filter

Tubings (Ø 3.2 mm)

Ref. 513 047

Set of 5 silicone tubings inner ø 3.2 mm

Tubings for pump (Ø 3.2 mm)

Ref. 561 302

Set of 6 silicone tubings for pump part (20 cm each), inner ø 3.2 mm

Tubings for pump (Ø 6.4 mm)

Ref. 561 304

Set of 6 silicone tubings for pump part (20 cm each), inner ø 6.4 mm

Autoclavable GL45 stopper + 0.2 µm filter

Ref. 561 401

Autoclavable GL45 stopper + 0.2 µm filter

Straight connectors (tubings ø 6.4 - 8 mm)

Ref. 561 403

Set of 6 straight connexions for 6.4 et 8 mm tubings for DiluFlow

Straight connectors (tubings ø 3.2 - 4.8 mm)

Ref. 561 404

Set of 6 straight connexions for 4.8 et 3.2mm tubings for DiluFlow

Y connectors (ø 6.4 - 8 mm)

Ref. 562 401

Set of 6 "Y" connectors for 6.4 mm tubings